Flow rate (at atm. pressure)

18

l/min

Vacuum

200

mbar abs.

Pressure

1.5

bar g

KNF N 024.11E Heated Pump with Thermostatic Control
Perfect for Hot Gas Analysis

N 024 ST.11E is a heated pump with thermostatic temperature control. The maximum permissible temperature of the media is 240°C.

To achieve best possible thermal insulation and thermal distribution, complex finite element calculations are used in the design process, making this pump the perfect solution for hot gas analysis.

Motor Data
Protection classIP 54
Voltage / Frequencies V/Hz~230/50
Power P1 W100
Operating current A0.6
Heating
Protection classIP 20
Voltage / Frequencies V/Hz~230/50
Power P1 W250
Operating current A1.2
Heating temperature °C240
More Options

There is a choice of pump drives ranging from a selection of AC motors to explosion-proof models. Heating with other voltages and frequencies are also available on request. Contact us for further details.

See Also
    • No condensation in the pump head
    • Maintenance free
    • Uncontaminated flow due to oil-free operation
    • High level of gas tightness, approx. 6×10-3 mbar × l/s (not tested in serial production)
    • Even saturation of heat throughout the pump head
    • Low heat loss to surroundings
    • Easy access to the pump head
  • Flow rate l/min at atm. pressure18
    Ultimate vacuum mbar abs.200
    Operating pressure bar g1.5
    Weight kg7.3 kg
    • Pump head: Stainless steel
    • Diaphragm: PTFE
    • Valves: PTFE

Related Products

More products available on the category page:

OEM Heated Pumps with Thermostatic Temperature Control

Tags

Contact Us

Contact Details

Contact Us Top