Max. flow rate l/min
3.25
Max. discharge bar
2
Verderflex Vantage 3000 C R3i - Peristaltic pump suitable for low to medium flow applications, manual and analog control
Accurate Dosing for Low to Medium Flow Applications

Verderflex Vantage 3000 series tube pumps is designed for low to medium flow applications. Offering excellent repeatibility (±0.5–2%), these compact pumps are perfect for the transfer, dosing or metering of abrasive, shear sensitive and highly viscous fluids. Currently three drive options are available:

  • Vantage 3000 B - standard on/off, left/right function
  • Vantage 3000 C - remotely controlled by analog signals
  • Vantage 3000 P - dispensing, programmable and remote operation
  • Function 3000 B 3000 C 3000 P
    Manual speed control✓︎︎✓︎︎✓︎︎
    Remote speed control
    Analog inputs (0–10V / 4–20 mA)
    Potentiometer (10kΩ)
    ✓︎︎✓︎︎
    Volt free contacts (footswitch)✓︎︎✓︎︎
    Digital input (RS-232)✓︎︎
    Speed ramp (soft start)✓︎︎
    Single shot or cyclic dosing✓︎︎
    Batch dosing✓︎︎
    Calibration✓︎︎✓︎︎
    Keypad lock✓︎︎✓︎︎
    Memory dose✓︎︎✓︎︎
    10 Dosing program memory✓︎︎
Programmable Timed Dosing

One of the favorite features of Verderflex Vantage 3000 is the “programmable timed dosing” option. This reliably dispenses a preset liquid volume, providing accurate and repeatable dosing up to ± 0.5%, dramatically speeding up the whole process.

Broad Material Compatibility

Subject to material compatibility, the tubing is certified to FDA CFR 21, EC 1935/2004, USP class VI & NSF and can be sterilized by autoclaving, gamma irradiation or Ethylene Oxide.

From left to right: (1) the EZ pump head offers multiple stackable options, (2) the S10 features an ergonomic design for ease of use, (3) the R3i provides thick wall tube support.
Flexible Pump Head and Tubing Options

Vantage 3000 C can be supplied with three different head designs (EZ / S10 / R3i), allowing different wall thickness tubing to be used:

Vantage 3000 C EZ

1.6 mm WT, max. flow rate: 1.31 l/min, max. discharge: 2 bar — multiple stackable and easy tube changeover

    • Pump material: Acetal and polyamide pump head, stainless steel shafts, Nylaytron® rollers, ball race bearings
    • Number of pump heads: single head standard, expandable to 4 using ES stacking heads (depending on tube size)
    • Tubing: Verderprene, Silicone, Tygon®, Viton®
    • Tube sizes: 0.8×1.6mm, 1.6×1.6mm, 3.2×1.6mm, 4.8×1.6mm, 6.4×1.6mm and 8.0×1.6mm
  • Tube (mm)RPMFlow (ml/min)Flow (l/hr)
    0.8×1.6100.90.05
    0.8×1.6755.60.34
    0.8×1.615011.30.68
    0.8×1.625018.81.13
    1.6×1.6102.90.17
    1.6×1.675211.3
    1.6×1.6150422.5
    1.6×1.6250704.2
    3.2×1.61010.70.64
    3.2×1.675814.9
    3.2×1.61501619.7
    3.2×1.625026816
    4.8×1.61023.31.4
    4.8×1.67517510.5
    4.8×1.615035321.1
    4.8×1.625058835.3
    6.4×1.61037.32.24
    6.4×1.67528216.9
    6.4×1.615056333.8
    6.4×1.625093856
    8.0×1.61052.73.16
    8.0×1.67539323.6
    8.0×1.615078847.3
    8.0×1.6250131078.8

    *Flows are typical and were measured with water at 20°C with no suction lift or discharge pressure. Actual flows will vary according to suction conditions, discharge pressure and normal component production tolerances.

Vantage 3000 C S10

2.4 mm WT, max. flow rate: 1.78 l/min, max. pressure: 2 bar — quick tube change, ergonomic design, can be used in heavy duty environments

    • Pump head: Polyoxymethylene (POM) and aluminium pump head, powder coated with Polymethylmethacrylate (PMMA) front cover
    • Rotor: Polyoxymethylene with stainless steel rollers
    • Number of pump heads: single standard, two on special order
    • Tubing: Verderprene, Silicone
    • Tube sizes: 3.2×2.4mm, 4.8×2.4mm, 6.4×2.4mm, 8.0×2.4mm
  • Tube (mm)RPMFlow (ml/min)Flow (l/hr)
    3.2×2.410201.2
    3.2×2.47524014.4
    3.2×2.415039023.4
    3.2×2.425046928.1
    4.8×2.410251.5
    4.8×2.47537022.2
    4.8×2.415058034.8
    4.8×2.425072943.8
    6.4×2.410502.7
    6.4×2.47550032.4
    6.4×2.415090053.4
    6.4×2.42501000065.6
    8.0×2.410804.8
    8.0×2.47590052.8
    8.0×2.4150150088.8
    8.0×2.42501780106.8

    *Flows are typical and were measured with water at 20°C with no suction lift or discharge pressure. Actual flows will vary according to suction conditions, discharge pressure and normal component production tolerances.

Vantage 3000 C R3i

3.2 mm WT, max. flow rate: 3.25 l/min, max. discharge: 2 bar — robust design with thick wall tube for suction and pressure handling, typically used in printing, dispensing and industrial detergent applications

    • Pump head materials: Aluminium, powder coated, Perspex front cover
    • Tubing: Verderprene, Silicone (Viton® and Tygon®: some sizes to special order)
    • Tube sizes: 6.4×3.2mm, 8.0×3.2mm, 9.6×3.2mm
  • Tube (mm)RPMFlow (ml/min)Flow (l/hr)
    6.4×3.210553.3
    6.4×3.27566039.6
    6.4×3.2150110066
    6.4×3.2250137582.5
    8.0×3.210975.8
    8.0×3.275116469.8
    8.0×3.21501940116.4
    8.0×3.22502425145
    9.6×3.2101307.8
    9.6×3.275156093.6
    9.6×3.21502600156
    9.6×3.22503250195

    *Flows are typical and were measured with water at 20°C with no suction lift or discharge pressure. Actual flows will vary according to suction conditions, discharge pressure and normal component production tolerances.

Typical use of Verderflex Vantage 3000 pumps include: bench-top laboratory processing, chemical, pharmaceutical and food flavoring. For more information, please contact us.

    • The speed / flow rate can be controlled manually or via analog signals
    • 24-hour duty brushless DC motor controlled by a micro processor
    • Supporting 3 different head designs, allowing different wall thickness (WT) tubing to be used
    • Gentle self priming pumping action, ideal for pumping shear sensitive cultures and broths
    • Handling the media without contamination
    • Set precise dose requirement and calibrate to suit medium viscosity
    • High repeatibility (±0.5–2%)
    • Stackable and multi-channel head options
  • Max. flow rate  1.31 l/min for EZ heads, 1.78 l/min for S10 heads, 3.25 l/min for R3i heads
    Max. (discharge) pressure  2 bar
    Speed  10–250 rpm
    Motor  24 hour duty brushless DC
    Power supply  85–265V AC 50/60Hz with fuseless resetable switch
    Protection class  IP 66
    Software features  Memory dose, keypad lock
    Display  2-line alphanumeric display
    Control options  Analog inputs (0–10V DC / 4 to 20mA), potentiometer (10kΩ), remote stop / start / reverse (footswitch option available)

Related Products

What’s Popular in Verderflex Peristaltic Cased Tube Pumps

More products available on the category page:

Verderflex Peristaltic Cased Tube Pumps

Tags

Contact Us

We offer a wide variety of customization options. Products can be custom-tailored to suit your needs.
Contact us to learn more: +886 2 27941011 09:00–17:30, Monday to Friday (UTC+8, except public holidays in Taiwan)

Contact Details

Talk to Us Today +886 2 2794 1011 Top